Hello,
I was unemployed from Feb 23 to July 2, this gave me plenty of time to build items and full fill orders for my customers, and even make new innovations. I recently took a pipeline locating contract with a local company, and they have me all over Texas for several weeks at a time. I am unable to manufacture under these conditions, so I'm closing for now. I may reopen later if I change jobs to a well paying one that gives me time to produce again.
I am working on a few new things for my own innovation. I applaud' "THE HOUSE OF GORD" for their AIR CHAIR machine. I am building a somewhat different version of it, with some better additions for more versatility. My chair will be made from fir 2x4's and be built like a large dinner chair with arm rests. The chair will be very adjustable with a sliding back, adjustable height arm rests, and a foot rest ledge across the front legs, so as to accommodate a female sub of almost any build. Like the "AIR-CHAIR" it will feature restraint straps, but will use aircraft seat belts instead of ratchet straps, and will also use pneumatic cylinders to tighten the straps for a given time period but will feature a timer countdown relay to operate the solenoid valve that tightens them, and their own separate air regulate to control the force applied. The timer will have a hard wired upper limit on time selectable for safety, and the air pressure regulator will also have a safety blow off to insure the force is not to high. The cylinders for tightening the straps will have individual ball valves to limit which ones tighten for special applications (physical disabilities, pregnant subs, etc.). The cylinders extension and retraction modes will have individual flow controls so as to allow for; sudden fast retraction and slow release (for those who like it rough), slow retraction and fast release (for those who like the creepy effect of being slowly restrained tightly for a short time), and fast/fast, or slow/slow to accommodate all personal preferences.
I'll also be building a pneumatic penetration machine using a pneumatic cylinder dual action and reed switches to dynamically control the extension length of the cylinder, and flow valves to control how fast the cylinder extends and how fast it retracts for the best effect on the sub its used on.
I'd like anyone reading this to check out the 'HOUSE OF GORD" specifically the AIR-CHAIR to get an idea of what I'm working on currently on paper and in notes.
I was unemployed from Feb 23 to July 2, this gave me plenty of time to build items and full fill orders for my customers, and even make new innovations. I recently took a pipeline locating contract with a local company, and they have me all over Texas for several weeks at a time. I am unable to manufacture under these conditions, so I'm closing for now. I may reopen later if I change jobs to a well paying one that gives me time to produce again.
I am working on a few new things for my own innovation. I applaud' "THE HOUSE OF GORD" for their AIR CHAIR machine. I am building a somewhat different version of it, with some better additions for more versatility. My chair will be made from fir 2x4's and be built like a large dinner chair with arm rests. The chair will be very adjustable with a sliding back, adjustable height arm rests, and a foot rest ledge across the front legs, so as to accommodate a female sub of almost any build. Like the "AIR-CHAIR" it will feature restraint straps, but will use aircraft seat belts instead of ratchet straps, and will also use pneumatic cylinders to tighten the straps for a given time period but will feature a timer countdown relay to operate the solenoid valve that tightens them, and their own separate air regulate to control the force applied. The timer will have a hard wired upper limit on time selectable for safety, and the air pressure regulator will also have a safety blow off to insure the force is not to high. The cylinders for tightening the straps will have individual ball valves to limit which ones tighten for special applications (physical disabilities, pregnant subs, etc.). The cylinders extension and retraction modes will have individual flow controls so as to allow for; sudden fast retraction and slow release (for those who like it rough), slow retraction and fast release (for those who like the creepy effect of being slowly restrained tightly for a short time), and fast/fast, or slow/slow to accommodate all personal preferences.
I'll also be building a pneumatic penetration machine using a pneumatic cylinder dual action and reed switches to dynamically control the extension length of the cylinder, and flow valves to control how fast the cylinder extends and how fast it retracts for the best effect on the sub its used on.
I'd like anyone reading this to check out the 'HOUSE OF GORD" specifically the AIR-CHAIR to get an idea of what I'm working on currently on paper and in notes.
